ÜW Transition assembly

For double hooks according to DIN 15402 – flawless finish.

Large master rings, combined with CW Connex and HSW eye hooks, make it possible to use smaller hooks, thereby opening up a wide range of possible combinations and load capacities, thanks to the modular assembly system. For details, please refer to the full operating manual.

The ÜW transition link assembly is manufactured according to EN 818‑4 with the mechanical values for G10 and is regarded as a high-quality product that lives up to its name throughout the pewag product range.

Product inquiry


Specification table

ÜW Transition assembly Code / Type Double hook DIN 15402 load capacity
[kg]
consisting of weight
[kg/pc.]
Measurement Image ÜW 50/4 II VSAW-HSWConnex 50 4,000 2xVSAW 1-16/AW36/ CW16/HSW10 28.09
ÜW 50/6,7 II VSAW-HW Connex 50 6,700 2xVSAW 1-16/AW36/ CW16/HSW13 29.28
ÜW 50/10 II VSAW- HW Connex 50 10,000 2xVSAW 1-16/AW36/ CW16/HSW16 30.60
ÜW 50/16 II VSAW-HS Connex 50 16,000 2xVSAW 1-16/AW36/ CW19/20/HSW19/20 33.10
ÜW 50/19 II VSAW-HS Connex 50 19,000 2xVSAW 1-22/AW50/ CW26/HSW22 67.09
ÜW 50/26,5 II VSAW-SW Connex 50 26,500 2xVSAW 1-22/AW50/ CW26/HSW26 73.44
ÜW 50/36 II VSAW-HS Connex 50 36,000 2xVSAW 1-22/AW50/ CW32/HSW32 91.81
ÜW 100/26,5 II VSAWHSW Connex 100 26,500 2xVSAW 1-32/320/AW50/ CW26/HSW26 133.44
ÜW 100/40 II VSAW-HW Connex 100 40,000 2xVSAW 1-32/320/AW50/ CW32/HSW32 151.81
VSAW angle of inclination: max. 35°.