SM S-hook

Bent on success.

This S-hook withstands temperatures of up to 300°C. It is manufactured according to EN 1677‑1 and classified as a grade 8 special accessory. The hook may also be used as an intermediate hook if the „g“ jaw size of the HSW hook is insufficient, or as an intermediate hook with wire rope loops.

Prior to each use, please determine whether the hook may be used without a safety catch. Always observe the load capacities – they do not correspond to grade 10! A full operating manual provides details on usage and application.

This S-hook comes with CE-marking. It is suitable for straight pull only and the tip must not be placed under load. An added benefit: Customised designs (also with a safety catch) are available upon request!

Product inquiry


Specification table

SM S-hook Code / Type load capacity
[kg]
e
[mm]
g
[mm]
d
[mm]
weight
[kg/pc.]
Measurement Image SM 5 800 180 42 16 0.60
SM 7/8 2,000 220 53 23 1.50
SM 10 3,150 280 58 31 3.40
SM 13 5,300 400 90 40 8.40
SM 16 8,000 500 120 50 16.00
SM 19 11,200 550 130 60 26.00
Custom designs are available upon request!