RSPSWP Load binder

The element for tension.

This load binder for two-part lashing chain systems in accordance with EN 12195‑3 is intended for the ZKWP lashing chain. It includes a pre-mounted shortening hook including safety catch and, depending on the selected lever length, all sizes are also suitable for frictional lashing (always take the STF value into account!).

As specified in the full operating manual, this load binder is not suitable for lifting or attaching loads. The lashing capacity is 50 % higher than for grade 8.

Thanks to the pre-mounted shortening hook, the load binder may be positioned anywhere in the ZKWP lashing chain. In short, this element is bound to create some tension!

Product inquiry


Specification table

RSPSWP Load binder Code / Type LC lashing capacity
[kN]
STF Standard tension force
[daN]
length closed L
[mm]
length open L
[mm]
Tension range
[mm]
Lever length l
[mm]
Jaw size g
[mm]
weight
[kg/pc.]
Measurement Image RSPSWP 7 47 1,900 486 631 145 237 10 4.60
RSPSWP 8 60 1,900 485 630 145 237 10 4.90
RSPSWP 10 100 3,000 531 676 145 355 13 6.70
RSPSWP 13 160 2,500 793 1,083 290 359 17 15.70