PLGW-SN

pewag winner profilift gamma screw nut.
Globally unique.

This screw nut works on the principle of tool-free assembly, which makes it unique worldwide. It takes the successful pewag PLGW supreme eyebolt one step further and is used on loads that come with a threaded bolt instead of a thread. Alternatively, the PLGW-SN supreme lifting point may be attached in a through-hole using a standard screw, which has the additional advantage of being able to use the same lifting point with different material thicknesses. This method requires just crack-tested screws (strength category 10.9) of different lengths.

For additional details and information, please refer to the full operating manual.

Further benefits of the PLGW-SN pewag winner profilift gamma supreme:

  • No tools are required for assembly or disassembly
  • Saves time, especially if frequent assembly/disassembly takes place
  • The lifting point is rotatable (may be set in the load direction) and loadable in all directions

Product inquiry


Specification table

PLGW-SN Code / Type thread
[mm]
load capacity 1-leg 0°
[kg]
load capacity 1-leg 90°
[kg]
load capacity 2-leg 0°
[kg]
load capacity 2-leg 90°
[kg]
load capacity 2-leg 0°-45°
[kg]
load capacity 2-leg 45°-60°
[kg]
load capacity 3+4-leg 0°-45°
[kg]
load capacity 3+4-leg 45°-60°
[kg]
load capacity 2 asymm.
[kg]
load capacity 3+4 asymm.
[kg]
Measurement Image PLGW-SN 0,3 t M8 1,000 300 2,000 600 400 300 600 400 300 300
PLGW-SN 0,5 t M10 1,500 500 3,000 1,000 700 500 1,000 700 500 500
PLGW-SN 0,7 t M12 2,000 700 4,000 1,400 1,000 700 1,400 1,000 700 700
PLGW-SN 1,5 t M16 4,000 1,500 8,000 3,000 2,100 1,500 3,000 2,200 1,500 1,500
PLGW-SN 2,3 t M20 5,000 2,300 10,000 4,600 3,200 2,300 4,800 3,400 2,300 2,300
PLGW-SN 3,5 t M24 6,500 3,500 13,000 7,000 4,900 3,500 7,400 5,200 3,500 3,500
PLGW-SN 4,9 t M30 12,000 4,900 24,000 9,000 6,900 4,900 10,300 7,300 4,900 4,900
PLGW-SN Code / Type thread
[mm]
load capacity
[kg]
a
[mm]
b
[mm]
c
[mm]
d
[mm]
e
[mm]
f
[mm]
hex-wrench
[mm]
weight
[kg/pc.]
Measurement Image PLGW-SN 0,3 t M8 300 25 45 10 21 55 35 12 0.17
PLGW-SN 0,5 t M10 500 25 45 10 21 55 35 12 0.17
PLGW-SN 0,7 t M12 700 30 55 12 25 65 43 14 0.28
PLGW-SN 1,5 t M16 1,500 35 64 14 29 72 50 19 0.42
PLGW-SN 2,3 t M20 2,300 40 73 16 34 82 54 22 0.50
PLGW-SN 3,5 t M24 3,500 50 86 18 40 95 69 27 1.00
PLGW-SN 4,9 t M30 4,900 60 110 25 47 115 90 36 1.90
Load capacity applies to crack-tested screws in strength category 10.9

Product description

Permitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table. Adjust the lifting point in the permitted load direction before loading.

  • Loadable with a 4-fold safety factor under break in all directions.

Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:

  • Direction of pull is obstructed.
  • Direction of pull is not within the indicated area.
  • Loading ring rests against edges or loads.
Each lifting point comes with an individual serial number. Also available with peTAG upon request.

3D views

Videos

Downloads

PLGW-SN 0,7 t

PLGW-SN 1,5 t

PLGW-SN 3,5 t

PLGW-SN 0,3 t

PLGW-SN 0,5 t

PLGW-SN 4,9 t