PLE/N eta

Tried-and-tested for pull in every direction.

Welding onto machine parts or vehicle bodies requires special products that are ideally suited for the hanging of lifting and lashing parts – and PLE pewag profilift eta (grade 8) is one of them. In fact, the product has made a name for itself among highstrength weldable lifting point, also for its integrated spring that keeps the ring in any position that is required. The product may be loaded in all directions.

Product inquiry


Specification table

PLE/N eta Code / Type load capacity 1-leg 0°
[kg]
load capacity 1-leg 90°
[kg]
load capacity 2-leg 0°
[kg]
load capacity 2-leg 90°
[kg]
load capacity 2-leg 0°-45°
[kg]
load capacity 2-leg 45°-60°
[kg]
load capacity 3+4-leg 0°-45°
[kg]
load capacity 3+4-leg 45°-60°
[kg]
load capacity 2 asymm.
[kg]
load capacity 3+4 asymm.
[kg]
Measurement Image PLE/N 6 1,120 1,120 2,240 2,240 1,500 1,120 2,300 1,600 1,120 1,120
PLE/N 8 2,000 2,000 4,000 4,000 2,800 2,000 4,200 3,000 2,000 2,000
PLE/N 10 3,150 3,150 6,300 6,300 4,400 3,150 6,600 4,700 3,150 3,150
PLE/N 13 5,300 5,300 10,600 10,600 7,400 5,300 11,200 7,900 5,300 5,300
PLE/N 16 8,000 8,000 16,000 16,000 11,300 8,000 16,900 12,000 8,000 8,000
PLE/N 22 15,000 15,000 30,000 30,000 21,000 15,000 31,800 22,500 15,000 15,000
PLE/N eta Code / Type load capacity
[kg]
a
[mm]
b
[mm]
c
[mm]
d
[mm]
e
[mm]
f
[mm]
h
[mm]
l
[mm]
weight
[kg/pc.]
Measurement Image PLE/N 6 1,120 36 40 62 11 67 42 26 35 0.31
PLE/N 8 2,000 37 42 69 13 73 45 28 37 0.40
PLE/N 10 3,150 41 45 78 16.50 80 47 34 40 0.63
PLE/N 13 5,300 61 55 99 22 97 53 44 50 1.46
PLE/N 16 8,000 63 70 120 25 120 73 48 64 2.30
PLE/N 22 15,000 89 97 163 33 163 92 70 90 5.40
Safety factor 4
Important: Subject to technical changes!

Product description

Permitted usage
For load capacities in the permitted directions of pull (fig. Permitted usage and permitted direction of pull), please refer to the load capacity table.

Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:

  • Direction of pull is obstructed.
  • Direction of pull is not within the indicated area.
  • Loading ring rests against edges or loads.

3D views

Downloads

PLE/N 13

PLE/N 22

PLE/N 16

PLE/N 6

PLE/N 10

PLE/N 8