Built to Secure. Made to Endure: pewag Launches Comprehensive New Shackles Range

pewag has launched a complete new shackles range including eight types of shackles. From everyday lifting and rigging to extreme cold environments and commercial fishing operations, the range is designed to give procurement managers and riggers a single, trusted source for shackles that meet both US and international standards.

A range built around one principle: no compromise on security

Shackles are among the most widely used components in lifting, rigging and load securement and among the most consequential when they fail. pewag’s new shackles range has been developed with that responsibility at its centre, combining high-quality alloy steel, rigorous manufacturing standards and a product architecture that gives users a clear, logical choice across every application.

Every product carries EN 10204 Type 3.1 certification including the chemical composition and mechanical properties of the material used, full batch traceability and online certificate access. All shackles come with a hot-dip galvanised bow and a powder-coated pin for corrosion resistance and long service life.

The full range complies with EN 13889, ASME B30.26, ISO 2415 and US Federal Specification RR-C-271, dual European and US standard compliance that makes pewag shackles suitable for international projects and global supply chains without the need to source different products for different markets.

Andreas Breidler, Technical Director Lifting Chains said: “By adding shackles to our portfolio, we are reaching another important milestone in the expansion of our lifting product range, further strengthening our ability to offer reliable and engineered lifting solutions.”

The Base range: four variants, every standard application covered

The Base series covers the four core shackle configurations that account for the vast majority of lifting, rigging and load securement requirements. All four are Grade 6 with a 6:1 safety factor, rated from 2 to 55 tonnes (screw pin) or 2 to 85 tonnes (BNC) and suitable for operating temperatures from -40°C to +200°C.

The P210 Bow shackle with screw pin is the go-to for temporary lifting operations, quick to rig and de-rig, with a hot-dip galvanised bow and powder-coated screw pin. Its bow geometry supports both single and multi-leg sling configurations, making it the natural choice for connecting lifting slings to loads in construction, marine and entertainment rigging applications.

Where load movement or vibration could cause a screw pin to loosen, the P215 Bow shackle with bolt, nut and cotter pin provides exceptional security. The bolt, nut and cotter pin (BNC) closure is the correct specification for permanent or semi-permanent setups, marine towing, mining and oil and gas operations where pin retention under dynamic loads is non-negotiable. WLL extends to 85 tonnes.

For single-direction lifts and straight-line pulls where side loading is minimised, the P220 Dee shackle with screw pin and P225 Dee shackle with bolt, nut and cotter pin deliver greater strength by virtue of their Dee-shaped geometry. Both are optimised for single-leg systems only and are suited to industrial lifting, load securing on trailers and handling machine parts in manufacturing environments.

Plus (P415): Grade 8 strength in a smaller package

For applications where load capacity requirements are high but space or weight is constrained, the P415 Bow shackle Plus with BNC delivers Grade 8 performance with smaller dimensions and reduced weight compared to a Grade 6 shackle of equivalent WLL. Rated from 3.3 to 85 tonnes with a 5:1 safety factor, it is the correct specification for lifting heavy equipment in confined spaces, turbine housings, engine rooms, ship hull sections and for mobile crane and offshore winch operations where connection point size and total system weight both matter.

The P415 operates down to -20°C and meets ASME B30.26 and US Fed. Spec. RR-C-271, making it appropriate for international heavy-lift projects.

Star (P615): certified performance at -60°C

The P615 Bow shackle Star with BNC is pewag’s solution for operations in extreme cold and are rated to -60°C (-76°F), a temperature at which standard shackles risk becoming brittle and failing under load. With a 7:1 safety factor (6:1 for the 55 and 85 tonne sizes) and Grade 8 steel, it maintains full impact strength and load capacity in conditions that would compromise competing products.

Target applications include offshore platforms in the North Sea, Alaska and Arctic regions, port operations affected by sea ice, wind energy installations in cold climates and polar logistics. For Norwegian havbruk operators and North Sea service vessel operators in particular, the P615 addresses a genuine operational gap that standard shackle ranges cannot fill.

The P615 carries EN 13889, ASME B30.26, ISO 2415 and RR-C-271 certification and is supplied with EN 10204 Type 3.1 material certificates and online certificate access.

“Most shackles are tested and rated for standard operating conditions. The P615 Star exists because our customers in the North Sea and Arctic environments needed something that wouldn’t just perform on paper, it has to perform at -60 degrees Celsius, in the field, every time.”

(P213) Fishing Bow shackle with screw pin

Fishing shackles (P213 & P223): designed for the deck, not just the drawing board

The two Fishing variants in the range are designed specifically for the realities of commercial fishing and aquaculture operations; environments where equipment is handled fast, in wet conditions, often by crew wearing heavy gloves and where failure of a connection can mean lost gear, lost catch or worse.

Both the P213 Fishing Bow shackle with screw pin and the P223 Fishing Dee shackle with screw pin feature a square-head screw pin designed to fit the standard tools carried on fishing vessels, ensuring a secure fit and reducing the risk of slippage or loosening in tough conditions. Both are Grade 6 with a 6:1 safety factor, rated from 2 to 25 tonnes and suitable from -40°C to +200°C.

Applications include connecting trawl net components, attaching mooring lines, anchor chains and buoys, hoisting nets, catches and heavy gear with cranes or winches and securing buoys, floats and markers to fishing gear or mooring systems.

The fishing shackles complement pewag’s broader Pelagus marine chain range including G60 aquaculture mooring chains, G80 and G95 fishing chains and the full suite of master links, connecting links and hooks allowing fishing and aquaculture operators to specify a complete, compatible hardware system from a single manufacturer.

Geometry, compliance and selection: what buyers need to know

The range is structured around two key choices: geometry (Bow vs. Dee) and pin type (Screw vs. BNC). Understanding these decisions simplifies specification:

• Bow shackles support both single and multi-leg sling configurations and accommodate angled loading, the correct choice for most lifting, marine and construction applications. The angle between legs must not exceed 120°.
• Dee shackles are optimised for straight-line pulls and single-leg systems only. They offer greater strength in this configuration but must not be used with multi-leg slings.
• Screw pin closures are ideal for temporary operations requiring fast rigging and de-rigging.
• BNC (bolt, nut and cotter pin) closures provide vibration-resistant security for permanent or semi-permanent setups and dynamic loading environments.

Every shackle in the range is marked with the pewag manufacturer’s mark, grade and batch code for full traceability. Online certificates are available for all products, supporting compliance documentation requirements on complex projects.

View the brochure and speak to our team!

The pewag shackles brochure is available to download now below, covering full technical specifications, dimensions, working load limits and safety instructions across all eight products.

Speak to our team today to discuss your requirements.

Lifting Done Right: How pewag’s New Mobile Crane Catalogue Tackles the Realities of On-Site Lifting

Mobile crane work is some of the most demanding lifting in the industry. Loads change from job to job, ground conditions are rarely ideal, schedules are tight, and crews often work within metres of suspended weights that can run to hundreds of tonnes. 

pewag’s new solutions and services for mobile crane applications catalogue brings products relevant to mobile crane operators together in one place and it doubles as a useful map of how the right mobile crane lifting equipment can make those operations safer, faster and easier to manage. 

This article walks through what the catalogue covers, but with mobile crane operations kept firmly at its heart: the challenges crews face today, why certification matters, the advantage of sourcing from a single manufacturer, and the technologies and services that turn a pile of rigging gear into a coherent, dependable lifting system. 

The challenges in mobile crane operations today

Anyone who has run a mobile crane knows the work rarely happens in controlled conditions. Sites are uneven, often exposed to weather, and frequently mid-construction. That introduces a familiar set of pressures: variable terrain that affects access and stability; dynamic loads that shift and swing; time pressure that tempts crews to cut corners; and the constant risk that comes from people working close to suspended weights. 

On top of the physical hazards sits an administrative one. Every lifting component has to be certified, inspected and documented and on a busy site with mixed equipment from several suppliers, keeping that paperwork straight is a genuine burden. Compatibility is another quiet problem: components that don’t share a common connection system can slow crews down and introduce weak points. The right equipment doesn’t just lift the load; it answers all of these problems at once. 

Why reliable, certified lifting equipment matters

In lifting, certification is not box-ticking, it is the difference between a controlled operation and an avoidable accident. pewag engineers its products around clear safety margins, and that thinking runs through the catalogue. pewag’s Snatch Blocks are built to a 4:1 safety factor, the LMS load-monitoring range is proof-load tested to 200% of capacity, and shackles are designed and produced in-house, giving pewag direct control over quality and traceability. 

For a crane crew, that reliability translates into confidence: equipment that performs as rated, certificates that stand up to scrutiny, and a lower chance of the kind of failure that stops a job, or worse. When the lifting gear is dependable and properly documented, the whole operation becomes more predictable. 

 The single-supplier advantage

The catalogue makes pewag’s position plain with a single phrase: your one-stop manufacturer. For mobile crane operators, sourcing lifting solutions from one supplier and, better still, from one manufacturer carries real, practical benefits. 

One manufacturer, consistent quality

When chain slings, shackles, hooks, spreader beams and monitoring equipment come from the same manufacturer, they share the same engineering standards and quality controls. There are no surprises from a mismatched batch and no guessing about how one maker’s tolerances compare with another’s. 

Compatibility that works on-site

pewag’s intelligent connection systems mean components are designed to work together. Crews spend less time improvising connections and more time lifting, with fewer of the weak points that creep in when incompatible parts are forced to fit. 

Unified support and documentation

A single source also means a single point of contact for inspection, certification, spare parts and advice. Instead of chasing several suppliers for paperwork, operators get consistent support and a coherent record of their entire lifting inventory. 

Safe, efficient load handling with chain and textile slings

Slings are the workhorses of any lift, and the catalogue covers the full spread so crews can match the tool to the load. 

G12 Plus chain slings

pewag’s chain sling systems are built in grade G12 Plus for an optimised strength-to-weight ratio, with intelligent connection systems for flexible on-site handling and minimal wear for easy inspection. Standardised, ready-made slings are offered in 3 m (10 ft) and 7 m (25 ft) lengths complete with all components, alongside fully customised configurations. Four-leg working load limits run from 11,200 kg on the winplus 10 up to 26,500 kg on the winplus 16 at the most favourable inclination. 

Textile and wire rope slings

Where loads have sensitive surfaces or weight is a concern, textile slings are the better choice. pewag’s polyester webbing and round slings are lightweight, easy to handle, gentle on finished surfaces and more cost-effective than chain, with round slings rated up to 300 tonnes and clear colour-coding for safe selection. For demanding industrial lifts, Grade 10 wire rope slings combine master links, hooks, shackles and spare parts into strong, durable assemblies. 

Innovative technologies that enhance safety

The Mobile Crane Applications Catalogue highlights how pewag’s broad range of lifting products changes how crews interact with the load, keeping people away from danger while speeding the work up. 

levo hook: automated, hands-free attachment

The levo hook is an automated lifting device that attaches and releases loads by remote control. The safety logic is simple but powerful: if no one has to stand under or beside a suspended load to hook or unhook it, that exposure risk largely disappears. The hands-free cycle also streamlines workflow, and the range spans 5,000 kg (LH5) to 32,000 kg (LH32), with Connex and Masterlink options and worldwide service support.

Swivels, snatch blocks and advanced connections

The Snatch Block (SBRH) is built specifically for mobile crane use, with a bolt-release mechanism that makes inserting wire rope quick, ideal for time-sensitive jobs and a bolt that cannot be lost during handling. Rated for 4, 8 or 12 tonnes at a 4:1 safety factor, with powder-coated corrosion resistance and a compact build, it is well suited to the dynamic, changeable conditions of field work. 

Reducing exposure, improving efficiency

Taken together, these technologies serve two goals at once: pulling workers back from hazardous lifting zones, and removing the manual fiddling that slows a lift down. Safer and faster are not competing priorities here: the same kit delivers both. 

Solutions for complex and heavy lifting

Not every lift is a simple pick. For awkward, oversized or very heavy loads, pewag offers below-the-hook solutions designed for adaptability. 

• Modulift MOD® Spreader Beam: a modular system rated from 6 to 2,000 tonnes with spans from 0.4 to 36 m. It reconfigures into different beam and frame setups, is lightweight enough for crane crews to transport easily, and is reusable across varied tasks. 
• pewag shackles: in-house bolt-type and screw-pin designs with working load limits from 2 to 1,500 tonnes, giving reliable connection points across the full range of lifting requirements.
• StrongHold rigging lockers: extreme-duty storage that keeps chains, hoists, straps and lifting points organised, inspectable and ready, which matters as much on a busy site as the lift itself. 

Load monitoring and control during the lift

Knowing exactly what is on the hook is fundamental to a safe lift, and pewag’s LMS range builds monitoring directly into the rigging.

LMS Load Links handle loads from 1 to 500 tonnes, built from lightweight aircraft-grade aluminium, accurate to 0.5% of applied load, wireless to 800+ metres and IP67-rated against water and dust. LMS Load Pin Shackles extend precise tensile monitoring from 3.25 to 2,000 tonnes and let crews link up to twelve shackles to a single handheld display, reading individual or total loads. Both are 200% proof-load tested and run up to 3,000 hours on a single battery. For mobile crane operators, that means real-time load data without dragging cables across a site.

Equipment built for mobile crane applications

What ties the catalogue together is how much of it is designed for mobility rather than the fixed conditions of a workshop. Load links are engineered for dynamic, on-the-go lifting; snatch blocks are compact and field-ready; spreader beams are light enough to move between jobs; and pewag’s snow and traction chains keep heavy crane vehicles reaching sites even in difficult winter conditions. This is gear that expects to be moved, set up quickly and trusted in the field. 

Technical support, service and training

Good equipment is only half the story. pewag are a partner across the full lifecycle of a lifting operation and not just a product supplier. 

• Technical consulting: direct access to specialists who help with product selection and application, drawing on knowledge of both the products and the demands of specific industries. 
• Documentation and certificates: online certificates give instant access to inspection reports without the usual waiting times, keeping compliance paperwork in order. 
• Training: the pewag academy delivers online courses on products and their correct use, available anytime, anywhere. 
• Maintenance and service: inspection and maintenance across Europe through pewag’s own team, and in the US through qualified partner companies. 
• Spare parts: ready availability that keeps equipment in service and minimises downtime. 

Digital tools round this out: configurators and product advisors help crews find or build the right solution for a specific lift, online, in minutes.  

A coherent system, from one source

pewag offers a single, compatible lifting system from G12 Plus chain slings and textile slings through automated hooks, modular spreader beams and wireless load monitoring, all backed by consulting, training and service from one manufacturer. For operators weighing up their mobile crane lifting equipment, that coherence is the real headline: equipment designed to work together, certified to perform, and supported throughout its life. 

Explore the full range in the new catalogue or visit the pewag shop to configure the right solution for your next lift.