Two part lashing straps
with ratchet and triangle ring with eye hook
according EN 12195-2
pewag lashing straps are manufactured according to EN 12195-2 and consist of polyester (PES).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap (E) is used for strapping and therefore does not need end fittings.
A two part lashing strap (Z) consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap (E) is used for strapping and therefore does not need end fittings.
A two part lashing strap (Z) consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).
End fittings:
RH = round hook
DHS = triangle ring with eye
Lashing straps must not be used for lifting loads, only for securing of load.
Tabla de especificaciones
| item number | EAN13 | designation | Fueza de tensión estándar [daN] |
Allowed lashing capacity of the lashing strap LC | Total length | signal color | tie-width [mm] |
Content |
|---|---|---|---|---|---|---|---|---|
| 10800 | 9002546108005 | ZG 50 x 8000 / 2500 Z DHS | 350 daN | 2500 daN | 8.000 | blau | 50 | 1 |