Single lashing straps

with ratchet

according EN 12195-2

pewag lashing straps are manufactured according to EN 12195-2 and consist of polyester (PES).
We distinguish between single lashing belts and two part lashing straps:
A single lashing strap is used for strapping and therefore does not need end fittings.
A two part lashing strap consists of a fixed end (end fitting, belt and tension device) and a loose end (belt and end fitting).

Lashing straps must not be used for lifting loads, only for securing of load.


-
Stock: Please specify product option(s).
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly
Stock: available shortly

Product Configurator Product query


Specification table

SAP item number EAN designation STF Standard tension force
[daN]
Allowed lashing capacity of the lashing strap LC Total length
[mm]
signal color tie-width
[mm]
Content
7002479 9002546914934 ZG 25 x 4000 / 250 E - 250 daN 4,000 blue 25 1
7001174 9002546699398 ZG 25 x 5000 / 250 E - 250 daN 5,000 blue 25 1
7002474 9002546914880 ZG 25 x 6000 / 250 E - 250 daN 6,000 red 25 1
7002475 9002546914897 ZG 35 x 6000 / 1000 E 280 daN 1000 daN 6,000 green 35 1
7002476 9002546914903 ZG 35 x 8000 / 1000 E 280 daN 1000 daN 8,000 green 35 1
7002485 9002546914996 ZG 50 x 8000 / 2000 E 360 daN 2000 daN 8,000 blue 50 1
7002484 9002546914989 ZG 50 x 8000 / 2500 E 350 daN 2500 daN 8,000 blue 50 1