PLAW alpha

pewag winner profilift alpha.
Simply the best!

This lifting point is 360° rotatable. The load ring is loadable in a wide range and can be positioned at any required angle due to its replaceable and patented spring. The hexagonal special screw is also replaceable and secured against loss. The PLAW pewag winner profilift alpha screw is made from 10.9 grade material, 100% crack-tested, covered with a chromate VI-free protection agent against corrosion and marked with the load capacity and thread size.

pewag winner profilift alpha is able to withstand a 4-fold safety factor against break in all directions and every single lifting point is marked with an individual serial number. pewag winner profilift alpha is available with metric or UNC-thread. The versions with metric thread are also available with customised thread lengths. All load capacities, categorised by type of application, the number of legs and angle of inclination, are contained in a table that forms an integral part of the operating manual included with each lifting point.

Also available with peTAG upon request.

Product Configurator

Specification table

PLAW alpha Code / Type thread
[mm]
load capacity
[kg]
a
[mm]
b
[mm]
c
[mm]
d
[mm]
e
[mm]
g
[mm]
h
[mm]
k
[mm]
n
[mm]
n max
[mm]
hex-wrench
[mm]
screw-wrench
[mm]
weight
[kg/pc.]
Measurement Image PLAW 0,3 t M8 300 45 67 40 11 41 95 36 55 20 150 10 24 0.57
PLAW 0,63 t M10 630 45 67 40 11 41 95 36 55 20 150 10 24 0.58
PLAW 1 t M12 1,000 45 67 40 11 41 95 36 55 33 170 10 24 0.60
PLAW 1,5 t M16 1,500 45 67 40 11 41 95 36 55 33 260 10 24 0.62
PLAW 2,5 t M20 2,500 54 81 50 13 55 112 50 67 33 335 8 24 1.10
PLAW 4 t (/13) M24 4,000 54 87 50 17 67 142 45 70 36 361 14 36 1.60
PLAW 6 t M30 6,000 75 115 67 20 68 143 67 100 49 364 14 36 3.10
PLAW 7 t M36 7,000 75 115 67 20 65 143 60 100 55 374 27 - 3.30
PLAW 8 t M36 8,000 93 147 85 27 87 188 85 120 55 365 19 41 6.10
PLAW 10 t M42 10,000 93 147 85 27 87 188 85 120 65 365 19 41 6.40
PLAW 15 t M42 15,000 115 181 105 33 108 246 106 150 63 340 19 55 12.00
PLAW 20 t M48 20,000 115 181 105 33 108 246 106 150 73 340 19 55 12.30
PLAW alpha Code / Type thread
[inch]
load capacity
[lbs]
a
[inch]
b
[inch]
c
[inch]
d
[inch]
e
[inch]
g
[inch]
h
[inch]
k
[inch]
n
[inch]
n max
[inch]
hex-wrench
[inch]
screw-wrench
[inch]
weight
[lbs/pc.]
Measurement Image PLAW U 3/8 3/8"-16 1,400 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 0.79 - 3/8" 15/16" 1.30
PLAW U 1/2 1/2"-13 2,200 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 1.30 - 3/8" 15/16" 1.32
PLAW U 5/8 5/8"-11 3,300 1.77 2.64 1.57 0.43 1.61 3.72 1.42 2.17 1.30 - 3/8" 15/16" 1.39
PLAW U 1 1/4 1 1/4"-7 13,200 2.95 4.53 2.64 0.79 2.68 5.63 2.64 3.94 1.93 - 7/8" - 6.80
PLAW U 1 1/2 1 1/2"-6 17,000 3.66 5.79 3.35 1.06 3.43 7.40 3.35 4.72 2.09 - 1" - 13.40
PLAW U 1 3/4 1 3/4"-5 22,000 3.66 5.79 3.35 1.06 3.43 7.40 3.35 4.72 2.44 - 1 1/4" - 14.10
PLAW alpha Code / Type thread
[mm]
fastening torque
[Nm]
load capacity 1-leg 0°
[kg]
load capacity 1-leg 90°
[kg]
load capacity 2-leg 0°
[kg]
load capacity 2-leg 90°
[kg]
load capacity 2-leg 0°-45°
[kg]
load capacity 2-leg 45°-60°
[kg]
load capacity 3+4-leg 0°-45°
[kg]
load capacity 3+4-leg 45°-60°
[kg]
load capacity 2 asymm.
[kg]
load capacity 3+4 asymm.
[kg]
Measurement Image PLAW 0,3 t M8 35 300 300 600 600 400 300 600 400 300 300
PLAW 0,63 t M10 70 630 630 1,260 1,260 850 630 1,300 900 630 630
PLAW 1 t M12 120 1,000 1,000 2,000 2,000 1,400 1,000 2,100 1,500 1,000 1,000
PLAW 1,5 t M16 150 1,500 1,500 3,000 3,000 2,100 1,500 3,100 2,200 1,500 1,500
PLAW 2,5 t M20 170 2,500 2,500 5,000 5,000 3,500 2,500 5,300 3,700 2,500 2,500
PLAW 4 t (/13) M24 400 4,000 4,000 8,000 8,000 5,600 4,000 8,400 6,000 4,000 4,000
PLAW 6 t M30 500 6,000 6,000 12,000 12,000 8,500 6,000 12,700 9,000 6,000 6,000
PLAW 7 t M36 700 7,000 7,000 14,000 14,000 9,800 7,000 14,800 10,500 7,000 7,000
PLAW 8 t M36 800 8,000 8,000 16,000 16,000 11,300 8,000 16,900 12,000 8,000 8,000
PLAW 10 t M42 1,500 10,000 10,000 20,000 20,000 14,000 10,000 21,000 15,000 10,000 10,000
PLAW 15 t M42 1,500 15,000 15,000 30,000 30,000 21,000 15,000 31,500 22,500 15,000 15,000
PLAW 20 t M48 2,000 20,000 20,000 40,000 40,000 28,000 20,000 42,000 30,000 20,000 20,000
PLAW alpha Code / Type thread
[inch]
fastening torque
[ft-lbs]
load capacity 1-leg 0°
[lbs]
load capacity 1-leg 90°
[lbs]
load capacity 2-leg 0°
[lbs]
load capacity 2-leg 90°
[lbs]
load capacity 2-leg 0°-45°
[lbs]
load capacity 2-leg 45°-60°
[lbs]
load capacity 3+4-leg 0°-45°
[lbs]
load capacity 3+4-leg 45°-60°
[lbs]
load capacity 2 asymm.
[lbs]
load capacity 3+4 asymm.
[lbs]
Measurement Image PLAW U 3/8 3/8"-16 52 1,400 1,400 2,800 2,800 1,960 1,400 2,940 2,100 1,400 1,400
PLAW U 1/2 1/2"-13 89 2,200 2,200 4,400 4,400 3,000 2,200 4,600 3,300 2,200 2,200
PLAW U 5/8 5/8"-11 110 3,300 3,300 6,600 6,600 4,600 3,300 6,800 4,800 3,300 3,300
PLAW U 1 1/4 1 1/4"-7 369 13,200 13,200 26,400 26,400 18,700 13,200 27,800 19,800 13,200 13,200
PLAW U 1 1/2 1 1/2"-6 590 17,000 17,000 35,200 35,200 24,800 17,000 37,300 26,400 17,000 17,000
PLAW U 1 3/4 1 3/4"-5 740 22,000 22,000 44,000 44,000 30,000 22,000 45,000 33,000 22,000 22,000
Safety factor 4
Important: Subject to technical changes!

Product description

Permitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table.

Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:

  • Direction of pull is obstructed.
  • Direction of pull is not within the indicated area.
  • Loading ring rests against edges or loads.

The load ring must be placed in the direction of pull before loading – do not turn under load! For additional details and information, please refer to the full operating manual.

Calculating the required thread length (L):
L = H + S + K + X
H = Material height
S = Thickness of the washer
K = Height of the nut (depending on the thread size of the screw)
X = Excess length of the screw (twofold pitch of the screw)
L max. = n max.

In addition to the standard and maximum thread lengths, pewag also offers cut-to-length thread lengths. Customised and maximum thread lengths are supplied with a washer and a crack-tested, corrosion-proofed screw nut.

For detailed information such as method of lifting, number of legs, angle of inclination etc., please refer to the tables with technical data.

3D views

Videos