BWW Sheet metal plate hook

The perfect lift.

The lifting of sheet metal stacks, boards etc. requires perfect tools - and the BWW sheet metal plate hook is one of them. It can also be supplied in customised dimensions upon request. As a standard, it may be used with Connex and the welded system and corresponds with EN 1677‑1 with the mechanical value of G10.

Please note that the product is not suitable for tip loading and that the hooks must be fully pushed onto the load. The lifting process must be carried out by means of min. a III-leg chain sling.
The classification of the WLL must be done carefully:

  • If a III-leg chain sling is used, the WLL is that of the corresponding II-leg chain sling
  • If a IV-leg chain sling is used, the WLL is that of the corresponding III-leg chain sling
The angle of inclination of the lifting system must be adjusted between 15° and 30°.


The sheet metal plate hook comes with CE-marking and a full operating manual.


-
Stock: Please specify product option(s).

Product query


Specification table

BWW Sheet metal plate hook Code / Type load capacity
[kg]
e
[mm]
s
[mm]
b
[mm]
h
[mm]
d1
[mm]
g
[mm]
weight
[kg/pc.]
Measurement Image BWW 7/8 2,500 131 80 50 15 28 55 1.50
BWW 10 4,000 170 100 70 20 36 65 2.80
BWW 13 6,700 209 130 80 25 40 90 5.30
BWW 16 10,000 263 160 100 30 50 110 10.50
BWW 19/20 16,000 306 185 120 40 60 130 17.50
BWW 22 19,000 368 220 140 50 75 150 30.50
Custom designs are available upon request!

Downloads

BWW 10

BWW 13

BWW 16

BWW 19/20

BWW 22

BWW 7/8